CloseX
United Kingdom United Kingdom
United Kingdom United Kingdom

IP Camera

Cave Wireless IP Camera

VHS-002-IPC

The Cave Wireless IP Camera is designed for use with the Cave Smart Home system. The camera is easily added to your existing Cave system using the Cave App. Wherever you are in the world, you can log into the App and view live footage from your home. Total peace of mind.

In Stock

€249.95

Find a retailer

Cave Wireless IP Camera

Key features

  • Free App - No monthly charges
    Cave is fully App controlled, set alarms when away from home or add an IP camera to your system and view your home remotely. The Cave App is free, there are no monthly charges for using the App
  • Easy bolt on
    Cave is modular, using a secure barcode system, you can add unlimited Cave accessories to your starter kit. Accessories can be paired to the App in minutes
  • Wireless
    Cave is wireless, easy to set-up and use. The starter kit includes everything you need to start your smart home alarm. Cave works over wifi, or a back-up SIM card, should the wifi go offline (SIM card not included)
Technical
  • Video compression H.264, supports three-stream
  • Resolution 720p (1280×720@22fps)
  • Sensor 1/4 inch 720p progressive scan CMOS sensor
  • Lens/View Angle 3.6mm@F1.2/62.6°
  • Night Vision Dual IR-Cut filter auto switch, 10pcs LEDs, 10m IR distance
  • Dual Way Audio Supported
  • Access Mode QR Code to pair
  • Storage up to 128GB microSD card
  • Power In DC 5V1A
  • App iOS & Android
  • Users 4 users simultaneously
  • WiFi Standard IEEE 802.11b/g/n
  • Motion Detect Supported
Product data sheet click to download
What’s in the box
  • 1 x Cave Wireless IP Camera
  • Multi-lingual User Manual

You may like...

Cave Smart Wireless Outdoor Siren

Cave Wireless Smart LED Bulb - E27

Cave Wireless Motion Sensor

Cave Wireless Contact Sensor

Questions?

  • Q: Why will my IP Camera not pair with my Cave Smart Hub?
    Answer : If you are experiencing problems pairing the Cave IP Camera to your Cave Smart Hub try following the steps below. IMPORTANT: During pairing the IP Camera will make 3 specific sounds. The ‘Sonic Wave’ a continual sound where the IP Camera and app communicate. The ‘Bong’ tone will sound every 25 seconds, this signifies the IP Camera is in pairing mode. The ‘Success’ tone, a higher pitched ring that will sound only once, the ‘Sonic Wave’ may continue to sound after the ‘Success’ tone but you should press 'Next' to finalise pairing.
    • 1. Plug the Cave IP Camera into a power source
    • 2. Open the Cave app and press the ‘Add Accessory’ button
    • 3. Press ‘By scanning QR Code’ and scan the barcode on the base of the Cave IP Camera
    • 4. This will prompt you to enter the wifi settings of your home network, enter details and press 'Next'
    • 5. The ‘Sonic Wave’ sound will start
    • 6. Press and hold the ‘RESET’ button on the back of the Cave IP Camera until it beeps once (approx 5-10 secs)
    • 7. The Cave IP Camera will now be in pairing mode, ensure your device is close to the camera during pairing
    • 8. After approx 30 secs the small green light on the front of the Cave IP Camera will start flashing
    • 9. Within 2 minutes from this point the Cave IP Camera will make a 'Success' tone, now press ‘Next’
    • 10. Name the Cave IP Camera
    • 11. Before you can view the Cave IP Camera for the first time you will be prompted to reset the password, press ok and enter a new password
    • 12. Once confirmed the camera will be online and ready to use
  • Q: How is footage saved?
    Answer : Please first ensure that you insert a compatible Micro SD card into the camera. Footage will be saved both locally (on the memory card) and onto the Cave app for viewing. Files will automatically loop record, meaning that if the card becomes full, the most recent footage will replace the oldest footage. Should an incident occur, please ensure to save the files before they are replaced- there is no way to retrieve replaced files.
  • Q: Does the Cave IP camera work with a generic App?
    Answer : Yes, the Cave IP Camera will work with a generic (non Cave) App. We recommend 'GrapeCam' iOS & Android. Download the app and follow these pairing instructions. IMPORTANT: During pairing the IP Camera will make 3 specific sounds. The ‘Sonic Wave’ a continual sound where the IP Camera and app communicate. The ‘Bong’ tone will sound every 25 seconds, this signifies the IP Camera is in pairing mode. The ‘Success’ tone, a higher pitched ring that will sound only once, the ‘Sonic Wave’ may continue to sound after the ‘Success’ tone but you should press 'Next' to finalise pairing.
    • 1. Plug the Cave IP Camera into a power source
    • 2. Open the GrapeCam app and press the ‘+’ button
    • 3. Press ‘By scanning QR Code’ and scan the barcode on the base of the Cave IP Camera
    • 4. This will prompt you to enter the wifi settings of your home network, enter details and press 'Next'
    • 5. The ‘Sonic Wave’ sound will start
    • 6. Press and hold the ‘RESET’ button on the back of the Cave IP Camera until it beeps once (approx 5-10 secs)
    • 7. The Cave IP Camera will now be in pairing mode, ensure your device is close to the camera during pairing
    • 8. After approx 30 secs the small green light on the front of the Cave IP Camera will start flashing
    • 9. Within 2 minutes from this point the Cave IP Camera will make a 'Success' tone, now press ‘Next’
    • 10. Name the Cave IP Camera
    • 11. Before you can view the Cave IP Camera for the first time you will be prompted to reset the password, press ok and enter a new password
    • 12. Once confirmed the camera will be online and ready to use